THUNDERBIRD VESSEL WITH CHEVRONS
This vessel was made with 277 pieces of the following woods: curly maple, walnut, cherry and sapele. It is approximately 10 1/2" in diameter and 6" in height. The inside is sealed with teak oil, while the outside has a base of teak oil and a finish of 10 coats of wipe on poly.
Sold
Walnut vessel with olive burl diamonds
This vessel consists of 313 pieces of walnut, maple and olive burl.
The measurements are approximately 6 1/2" tall by 11 1/2" in diameter.
The wood has been sealed both inside and out with a mixture of Seal Coat and denatured alcohol. The outside was then finished with 12 coats of wipe on poly.
$250.
If you are interested in or have any questions regarding items on this page, please email me at bolandtm@gmail.com and I can email an invoice through PayPal
Sold
SEGMENTED VESSEL #100
SEGMENTED VESSEL #100
This segmented vessel measures approx. 8 1/2" in diameter and 3 3/4" in height. It consists of a total of 161 pieces of the following woods:
Cherry, curly maple, sapele (African mahogany) and turquoise acrylester.
Sold
SEGMENTED VASE #101
This unique vase is approximately 7 3/4" high and 5" at its widest point. It consists of 145 pieces of the following woods:
SIPO (An African mahogany also called 'utile'.)
PERUVIAN WALNUT (Used in the base and top)
MAPLE (Round plug in base)
The finished thickness is roughly 3/8" (slightly thicker in the base to provide stability)
The finish consists of no wax shellac sealer (Seal Coat) both inside and out, teak oil both inside and out, and the outside is finished with a minimum of 10 coats of wipe-on gloss poly.
A glass vase insert that measures 7 1/2" tall x 1 5/8" diameter is included.
Sold
OPEN SEGMENTED VASE #102
This vase is approximately 9" wide x 8 3/4" tall. The woods used are maple, walnut, and sipo(African mahogany). A total of 402 pieces were used to construct this vase. A clear glass vase insert is included to be used to display cut flowers.
The finish consists of no wax shellac sealer (Seal Coat) both inside and out, teak oil both inside and out, and the outside is finished with a minimum of 10 coats of wipe-on satin poly.
Sold
SEGMENTED VASE #103
This vase has a 'feature ring' consisting of Peruvian walnut, cherry and turquoise acrylic in a 'zig zag' design giving the vase a Southwestern look.
The finish consists of no wax shellac sealer (Seal Coat) both inside and out, teak oil both inside and out, and the outside is finished with a minimum of 10 coats of wipe-on gloss poly.
It measures 5" wide X 8 1/2" tall. A clear glass vase insert is included to be used to display cut flowers.
The construction consists of 451 pieces of black walnut, Peruvian walnut, cherry and turquoise acrylic.
Sold
SEGMENTED VASE #104
This is referred to as a 'transition' vase, since the base, top, and 'feature ring' are constructed using segments while the cherry portions are one piece each. It is finished using no wax shellac for a sealer, Danish finishing oil and semi gloss wipe on poly.
The dimensions are approximately 6" wide X 7" tall. and was constructed using 66 pieces of cherry, maple, walnut, East Indian rosewood and spalted maple. A pvc tube is included as an insert to display cut flowers.
Sold